Folding - Unfolding - Vermeiren Trigo T-line Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 101
EN
NL
2.4

Folding - unfolding

CAUTION
• Make sure that your fingers don't get trapped at the pivot point of the handles and
PL
frame cross.
CS
• Always keep the swing range of the footplate in mind to prevent bystanders from
being injured or objects from being damaged.
To fold the wheelchair:
4.
Pull the seat cushion and remove it.
5.
Remove the footrests, see §3.6.
6.
Grab the front and back of the seat (15) in the middle,
and pull to close.
7.
Push seat frame tubes (5) together.
8.
Remove the rear wheels If necessary, see §2.5.
To unfold the wheelchair:
1.
Pull the seat frame tubes (5) outwards, and push the
seat frame down at the left and right side until the
seat is flat and the frame is locked into place.
2.
If removed, assemble the rear wheels, see §2.5.
3.
Place the seat cushion (4) on the Velcro straps of the
seat. Make sure that the straps of the seat cushion lie
transverse over the straps of the seat.
4.
Mount the footrests, see §3.6.
Risk of injuries and/or damage
6
Trigo T
2019-02
Before use
15
5
8

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Trigo t

Tabla de contenido