Removing/Mounting Footrests; Comfort Adjustments - Vermeiren Trigo T-line Manual De Instrucciones

EN
NL
3.6

Removing/mounting footrests

To remove the footrests
1.
Pull the lever (22) on the footrest.
2.
Swing the footrest to the side of the wheelchair.
PL
3.
Take the footrest out of the footrest support (23).
CS
4.
Repeat for the second footrest.
To mount the footrests
1.
Place the footrest in the footrest support (23),
holding the footrest on the side of the wheelchair.
2.
Turn the footrest to the front until it clicks into place.
3.
Repeat for the second footrest.
3.7

Comfort adjustments

CAUTION
• The following comfort adjustments can be done by the attendant or caretaker. All
other adjustments are done by your specialist dealer (see installation instruction).
• Always keep the swing range of the footrest in mind to prevent bystanders from being
injured or objects from being damaged.
• Make sure that your fingers, clothes, buckles won't get entrapped during adjustment.
3.7.1 Backrest width and support
The backrest of the wheelchair has a suspension system with three adjustable straps, to
adjust the width and flexibility of the backrest.
1.
Pull the backrest cushion from the Velcro straps of
the backrest.
1.
Loosen the Velcro straps.
2.
Pull the respective strap to the desired position.
The tension of the individual belts can be varied and
the desired support of the back can be set.
3.
Place the back cushion back over the backrest
starting at the front and ending at the back.
4.
Secure the Velcro connections by pressing the cushion against the backrest with your
hand.
5.
Make sure that all straps are secured with Velcro.
Risk of injuries and/or damage
10
Trigo T
2019-02
Using your wheelchair
22
23