Default Display Screen - Gima OXY 110 Guía De Uso

4.2 Default Display Screen

Press " " power key for 2 seconds to start up the Oximeter, then the screen will
display the default screen, as shown in Figure 4.2.
Auto-rotate icon
Auto power off
disable icon
User ID
Patient type
SpO mark
2
SpO value
2
SpO high/low
2
limit setting
value
Pulse rate
mark and unit
HR high/low limit
setting value
Perfusion index
Current time
Figure 4.2A Default Display Screen---in vertical
Description:
• During measurement, if the finger is not inserted properly, or the probe is not con-
nected or the probe is off from the finger, then "Check Probe" message prompts and
keeps blinking on the screen, and "bibibi..." alert sound appears simultaneously.
Alert sound is sustaining for about 3 minutes, and if there is no any key operation in
this period, then the device will power off automatically (if the auto power off func-
tion is enabled).
• During measurement, longtime pressing Auto-rotate/Up key "
the Auto-rotate white icon "
ENGLISH
" appears on the upper right corner of the
48
Wireless icon
Recording mode
Sound indicator
Battery indicator
Pulse Strength
bar-graph
Pulse symbol
Pulse rate value
TEMP value
Plethysmogram
", then