Before You Start - SPALDING 1-800 Manual Del Propietário

To ensure optimal playability of backboard system, a close tolerance fit between the elevator components and
hardware is required. Test-fit large bolts into large holes of elevator tubes, backboard brackets, and triangle
plates. carefully rock them in a circular motion to ream out any excess paint from holes if necessary. Not all parts
sEcTION A: ASSEMBLE THE ELEVATOR TUBES TO
This is what your system will
look like when you've finished
this section.
you will need to refer to separate
instructions included with rim
and/or backboard hardware for
assembly.
bEfORE yOu sTART!
shown are included with every system.
A STEEL-FRAMED ACRYLIC BACKBOARD
NOTE:
board
style will
vary.
NOTE:
Identify elevator tubes (28).
Toward
board
7
28
Elevator Tubes
Toward
mount