Installing The Led Light Kit And Shade - Kichler 52 Chiara Manual De Instrucciones

INSTALLING THE LIGHT KIT AND SHADE
NOTE: Before continuing installation, confirm that the power is still turned o at the main
circuit breaker or by removing the circuit fuse. Turning the power o using a wall switch
is not su cient to prevent electrical stock.
Step 1. Remove three(3) screws preinstalled on outter side of switch housing and keep for
use later. (Fig. 16)
Step 2. Attach the connector from the LED light kit to the connector from motor
assembly.(Fig.16)
NOTE: The two connectors have keyholes that must be mated correctly before they
can engaged.
Step 3. Tuck the connections neatly into the light kit. Align three round holes on the light
kit and switch housing. Securely tighten with 3 screws removed on step 1.(Fig.16)
Step 4. Secure the shade to switch housing by twisting in a clockwise direction. Do not
over-tighten. (Fig. 17)
Switch Housing
LED Light Kit
Light Kit Assembly Screw
Fig. 16
Switch Housing
Shade
Fig. 17
52" Chiara LED 13