Publicidad
Idiomas disponibles
Idiomas disponibles
OBJ_BUCH-0000000070-002.book Page 11 Thursday, July 24, 2014 11:37 AM
Filling the coolant container
(figure 4).
Prevent the flow of liquid
WARNING
along the cable into the
socket outlet or into the core drill unit, as this
can lead to electric shock. Tie a bow in the
cable near the plug, so that any liquid can drip
off.
Fasten the coolant container. Mount the cool-
ant container on the opposite side of the cap-
stan handle.
Unscrew the cap from the coolant container.
Fill in pump-feedable cooling lubricant, e.g.
Slugger cutting oil.
Replace the cap back onto the coolant con-
tainer.
Do not use the magnetic base drill unit if the
cooling lubricant system is defective. Check
for proper seal against leaks and for cracks in
the hoses. Prevent liquids from entering or
penetrating electrical components.
en
11
Publicidad
