Publicidad
Idiomas disponibles
Idiomas disponibles
OBJ_BUCH-0000000070-002.book Page 6 Thursday, July 24, 2014 11:37 AM
en
6
Hot mixtures of sanding dust and paint/var-
nish residuals or other chemical materials in
the filter bag or the vac filter can self-ignite
under unfavourable conditions, such as spark-
ing from sanding metal, continuous sunlight
or high ambient temperatures. To prevent
this:
Emission values for sound (Two-figure – specifications as per ISO 4871)
Sound emission
A-weighted emission pressure power level measured at the workplace
L
(re 20 μPa), in decibels
pA
K
Measuring uncertainty
Measured A-weighted sound power level
K
Measuring uncertainty
C-weighted peak sound pressure level measured at the workplace
in decibels
Measuring uncertainty
K
REMARK: The sum of the measured emission value and respective measuring inaccuracy
represents the upper limit of the values that can occur during measuring.
Wear hearing protection!
Measured values determined in accordance with the corresponding product standard.
Extension cable.
If the use of an extension cord
WARNING
is required, its length and con-
ductor cross-section must be adequate for the
application in order to prevent a voltage drop
in the extension cord, power loss and over-
heating of the power tool. Otherwise, the
extension cable and power tool are prone to
electrical danger, and the working efficiency is
decreased.
Intended use of the power tool:
Magnetic base drill for drilling with annular
cutting tools on ferrous materials in con-
trolled environments using the cutting tools
and accessories recommended by the manu-
facturer.
– Avoid overheating the material being
– Empty the dust collector/container rou-
– Observe the material manufacturer's
– Observe the relevant regulations for the
, in decibels
pA
L
(re 1 pW), in decibels
wA
, in decibels
wA
, in decibels
pCpeak
Recommended dimensions of extension cords
at an operating voltage of 120 V – single-
phase a. c., with only JHM Short Slugger con-
nected:
Max. cable length, ft
≤ 100
Min. conductor size
A.W.G.
sanded and the power tool.
tinely.
working instructions.
materials being worked.
L
,
pCpeak
Max. cable length, m
100
200
≤ 30
–200
–300
Min. conductorcross-
section, mm
16
14
12
1.5
83
3
94
3
98
3
30
60
– 60
–100
2
2.5
4
Publicidad
