Maintenance - GreenWorks 2600802 Manual Del Propietário

MAINTENANCE

REPLACING THE SCRAPER (See Figures 9-10)
W A R N I N G
IN ORDER TO AVOID SERIOUS PERSONAL INJURY, TURN THE SNOW SHOVEL
OFF AND UNPLUG IT BEFORE PERFORMING ANY MAINTENANCE.
Use only the manufacturer's original replacement parts.
• Place the snow shovel on the ground or on a work bench. Position the snow shovel so that
the impeller is facing up.
• Remove the four (4) screws that are located beneath the impeller that secure the scraper
to the housing using a phillips screwdriver. (Fig. 9).
• Remove the scraper, and discard it in the proper manner. (Fig. 10).
• Snap the new scraper into position, and attach it to the snow shovel by reinstalling the
four (4) screws.
screws
Fig. 9
scraper
16
scraper
Fig. 10