Maintenance - GreenWorks 2600702 El Manual Del Propietario

MAinTEnAnCE

sERVIcING
Servicing should be performed by a qualified technician. Replacement parts for this snow
shovel must be identical to the parts that they replace. if repairs are necessary, contact the
Toll-free Helpline, at 1-888-908-6757.
REPLAcING THE scRAPER (See Figure 9-10)
w A R N I N G
IN ORdER TO AVOId sERIOUs PERsONAL INJURY, TURN THE sNOw sHOVEL
OFF ANd REMOVE BATTERY BEFORE PERFORMING ANY MAINTENANcE.
Use only the manufacturer's original replacement parts.
• Place the snow shovel on the ground or on a work bench. Position the snow shovel so that
the impeller is facing up.
• Remove the four (4) screws that are located beneath the impeller that secure the scraper
to the housing using a phillips screwdriver. (fig. 9).
• Remove the scraper, and discard it in the proper manner. (fig. 10).
• Snap the new scraper into position, and attach it to the snow shovel by reinstalling the
four (4) screws.
screws
Fig. 9
Fig. 10
scraper
18
scraper