Introduction; Intended Use; Features; Package Contents - Parkside PDS 290 B2 Manual Del Usuario

DELTA SANDER PDS 290 B2

Introduction

Congratulations on the purchase of your new appli-
ance. You have chosen a high-quality product. The
operating instructions are part of this product. They
contain important information about safety, usage
and disposal. Before using the product, please
familiarise yourself with all operating and safety
instructions. Use the product only as described and
for the range of applications specified. Please also
pass these operating instructions on to any future
owner.

Intended use

Depending on the sandpaper being used, this
appliance is suitable for the dry sanding of wood,
plastic, metal, filler and also painted surfaces.
The appliance is particularly suitable for corners,
edges and hard-to-reach areas. Any other usage of
or modification to the appliance is deemed to be
improper and carries a significant risk of accidents.
The manufacturer accepts no responsibility for
damage(s) resulting from improper usage. This ap-
pliance is not intended for commercial use.

Features

ON/OFF switch
Speed adjustment wheel
Power cord
Extraction nozzle
Air vents
Sanding plate (360° rotation)
Adapter for dust extraction
Reducer
Sanding sheet
│ GB │ MT
■ 32

Package contents

1 delta sander PDS 290 B2
3 sanding sheets
1 adapter for dust extraction
1 reducer
1 set of operating instructions

Technical data

Rated power
consumption:
Rated voltage:
(AC)
Rated idle speed:
Rated no-load
oscillation speed:
Sanding plate:
Protection class:
Noise emission value:
Noise measurement value determined in accor-
dance with EN 60745. The A-rated noise level of
the power tool is typically as follows:
Sound pressure level L
PA
Uncertainty K :
PA
Sound power level L
WA
Uncertainty K :
WA
Wear hearing protection!
Vibration emission value:
Vibration values (vector total of three directions)
determined in accordance with EN 60745:
Vibration emission value a
Uncertainty K = 1.5 m/s
NOTE
► The vibration level specified in these instruc-
tions has been measured in accordance with
a standardised measuring procedure and
can be used for equipment comparisons. The
specified vibration emission value can also
be used to make an initial exposure estimate.
290 W
230 V ∼ 50 Hz
n 6000–11000 rpm
0
n 12000–22000 rpm
0
360° rotation
II / (double insulation)
: 82 dB (A)
3 dB
: 93 dB (A)
3 dB
= 8.2 m/s 2
h
2
PDS 290 B2