Checklist Before Starting Pump Motor; Servicing Of A Double-Insulated Appliance - Briggs & Stratton PW101-2010 Manual Del Operador

Checklist Before Starting Pump Motor

Review the unit's assembly to ensure you have performed
all of the following.
1. Be sure to read Operator Safety and Operation before
using the electric pressure washer.
2. Check for properly tightened hose connections.
3. Check to make sure there are no kinks, cuts, or damage
to hoses.
4. Provide a proper water supply at an adequate flow.
5. Plug electrical power cord into a dedicated electrical
circuit rated for 120 Volts AC at 15 Amps that is
properly installed in accordance with all local codes and
ordinances. Check that circuit is not used to supply any
other electrical needs.
8
Servicing Of A Double-Insulated
Appliance
In a double-insulated product, two systems of insulation
are provided instead of grounding. No grounding means
is provided on a double-insulated product, nor should a
means for grounding be added to the product. Servicing
a double-insulated product requires extreme care and
knowledge of the system, and should be done only by
qualified service personnel. Replacement parts for a
double-insulated product must be identical to the parts
they replace. A double-insulated product is marked
with the words "DOUBLE INSULATION" or "DOUBLE
INSULATED."
The symbol means DOUBLE-INSULATED
APPLIANCE.
BRIGGSandSTRATTON.COM