Connecting The Speaker Output Terminals - Pioneer GM-D8500M Manual De Instrucciones

Section
03 Connecting the units
4 Terminal screws
5 Battery wire
6 Ground wire
7 System remote control wire
Connecting the speaker
output terminals
1 Expose the end of the speaker wires
using nippers or a cutter by about 10 mm
(3/8 in.) and twist.
2 Attach lugs to speaker wire ends. Lugs
not supplied.
Use pliers, etc., to crimp lugs to wires.
1 Lug
2 Speaker wire
3 Connect the speaker wires to the
speaker output terminals.
Fix the speaker wires securely with the term-
inal screws.
10
En
1 Terminal screws
2 Speaker wires
3 Speaker output terminals
Twist