Nogueira FTN-1600 Manual De Instrucciones página 225

The machine does not gather the crop.
Probable cause
Broken safety pin(s).
Tractor below the minimum
recommended power.
Incorrect PTO speed.
Bad or uneven cut.
Probable cause
Dull rotor knives.
Worn rotor counter knife.
Rotor knives detached from
counter knife.
Low production.
Probable cause
Inconstant work speed.
Bad forage wagon transport
logistic or organization.
Inadequate tractor.
Improper ground for mechanized
harvesting.
Replace the safety pin(s).
Use a tractor with the recommended
power.
Keep the rotation indicated for the
machine version (540 or 1000 rpm).
Sharpen the knives.
Turn over the knife or replace it.
Adjust the spacing between knives
and counter knife.
Try to keep your work speed as
constant as possible.
Organize the positioning and shifting
from forage wagons.
Use a tractor with adequate power.
Cultivate on proper ground.
Instructions Manual
8. Practical Guide
Solution
Solution
Solution
105