1- Side Coupling - Nogueira FTN-1600 Manual De Instrucciones

4. Preparation

4.3.1- SIDE coupling

In order to facilitate the transport, generally,
the frame for side coupling of the harvester to
the tractor remains disassembled and folded,
as shown in the figure on the side.
For the side coupling of the machine,
assemble the side frame according to the
instructions below.
First, check that the lock pin (P) is in the
1.
position shown in the figure on the side.
Put it on if it isn't;
Hitch the side frame (A) to the three
2.
hydraulic lift points on the tractor. Start
the coupling by the left arm (A), then the
right arm (B) and finally the third point (C);
Lock the arms with the locking pins,
3.
provided with the machine;
38
SIDE COUPLING
Instructions Manual
FOLDED SIDE
FRAME
P
C
B
A