2- Rear Coupling - Nogueira FTN-1600 Manual De Instrucciones

4. Preparation

4.3.2- REAR Coupling

Approximate the tractor to the machine,
1.
aligning the tractor power take-off to the
machine's drive shaft;
Start the coupling by the left arm (A),
2.
then the right (B) and finally the hydraulic
cylinder (C);
Lock the arms with the locking pins (E),
3.
provided with the machine;
Using the tractor stabilizers, center the
machine with the tractor and adjust the lateral
clearance. If you have any doubt, consult your
tractor manual.
CAUTION!
• Make sure that the hydraulic arms
are securely attached to the Harvester
before transporting or using it.
• Be sure to place the locking pins (E) on
the 3 coupling pins.
Failure to follow these instructions can
lead to personal injury and property
damage.
44
REAR COUPLING
Instructions Manual
C
B
A
E