3- Front Coupling - Nogueira FTN-1600 Manual De Instrucciones

4.3.3- FRONT coupling

The Harvester can also be used on tractors with a front PTO and 1000 rpm,
with a direction of rotation compatible with that indicated in the image below.
Standard direction of rotation, according to
ISO / WD 8759-3.
NOTE: Make sure the gearbox is mounted
in the 1000 RPM rotation position.
In models of tractor with direction of rotation contrary to the standard (image
below), the inverter rotation kit must be used. As it is a specific accessory for
this tractor condition, the INVERSOR KIT is not supplied with the harvester and
can be purchased separately.
NOTE: kit is specific for PTO with 1000 rpm.
B
Coupling to the tractor is done
through the three points indicated
in the figure above.
Instructions Manual
4. Preparation
C
A
ROTATION
INVERTER KIT
45