Adjusting The Cutting Height - Nogueira FTN-1600 Manual De Instrucciones

4. Preparation

4.8- Adjusting the cutting height

The harvester has an articulated wheel
hydraulically operated that makes it possible
to regulate the cutting height.
Operate the hydraulic cylinder (D) to lift or
lower the machine, proceeding according to
the instructions below.
To adjust the cutting height:
Press and hold the 'ADJUST THE CUTTING
1.
HEIGHT' button on the Joystick (see the
figure on the side).
Move the tractor hydraulic control lever.
2.
NOTE!
The side to which the lever is moved
(forward or backward) determines
whether the machine will raise or
lower. Take a test and observe.
58
100 mm
MINIMUM CUTTING HEIGHT
510 mm
MAXIMUM CUTTING HEIGHT
Instructions Manual
D
The hydraulic cylinder (D) adjusts the
cutting height
TO ADJUST
THE
CUTTING
HEIGHT
JOYSTICK