Adjusting The Pedestal Level (Black Level); Adjusting The Colors; Setting The Picture To Suit The Movie; Setting The Picture Modes According To The Brightness Of The Room - Pioneer PDP-6100HD Manual De Instrucciones

Adjusting the pedestal level (black level)

This feature adjusts the video black level in a video image.
Example: Setting "3.75"
On "SET UP LEVEL" of "PICTURE" menu, select "3.75".
PICTURE
PICTURE MEMORY
CONTRAST
BRIGHTNESS
SHARPNESS
COLOR
TINT
DNR
COLOR TEMP.
GAMMA
LOW TONE
SET UP LEVEL
COLOR MGT
PURECINEMA
AV SELECTION
SEL. ADJ.
Information
SET UP LEVEL settings
0: Normal status
3.75: 3.75% lower than normal
7.5: 7.5% lower than normal

Adjusting the colors

Use this procedure to adjust hue and color density for red,
green, blue, yellow, magenta and cyan.
You can accentuate the green color of trees, the blue of
the sky, etc.
Example: Adjusting the color management for blue
On "PICTURE" menu, select "COLOR MGT", then press
the MENU/SET button.
The "COLOR MGT" screen appears.
On "BLUE" of "COLOR MGT", adjust the color
management.
COLOR MGT
RED
GREEN
BLUE
YELLOW
MAGENTA
CYAN
RESET
SEL. ADJ.
Information
COLOR MGT settings
RED: Makes red's adjustment
GREEN: Makes green's adjustment
BLUE: Makes blue's adjustment
YELLOW: Makes yellow's adjustment
MAGENTA: Makes magenta's adjustment
CYAN: Makes cyan's adjustment
RESET: Resets settings to the factory default value.
Use and buttons to select "ON", then press the
MENU/SET button.
: OFF
R G
: LOW
: MIDDLE
: 2.1
: AUTO
: 3.75
: ON
: DYNAMIC
EXIT RETURN
Y M
C Y
M C
G R
R B
B G
: OFF
EXIT RETURN

Setting the picture to suit the movie

The film image is automatically discriminated and
projected in an image mode suited to the picture.
[NTSC, PAL, PAL60, 480I (60Hz), 525I (60Hz), 1035I
(60Hz), 1080I (60Hz) only]
Example: Setting the "PURECINEMA" to "OFF"
On "PURECINEMA" of "PICTURE" menu, select "OFF".
PICTURE
PICTURE MEMORY
CONTRAST
BRIGHTNESS
SHARPNESS
COLOR
TINT
DNR
COLOR TEMP.
GAMMA
LOW TONE
SET UP LEVEL
COLOR MGT
PURECINEMA
AV SELECTION
SEL. ADJ.
Information
PURECINEMA
ON: Automatic discrimination of the image and
projection in PURECINEMA.
OFF: PURECINEMA does not function.
Setting the picture modes according to the
brightness of the room
There are four picture modes that can be used effectively
according to the environment in which you are viewing
the display.
Example: Setting the "MOVIE1" mode
On "AV SELECTION" of "PICTURE" menu, select
"MOVIE1".
PICTURE
PICTURE MEMORY : OFF
CONTRAST
BRIGHTNESS
SHARPNESS
COLOR
TINT R G
DNR : LOW
COLOR TEMP. : MIDDLE
GAMMA : 2.1
LOW TONE : AUTO
SET UP LEVEL : 0
COLOR MGT
PURECINEMA : ON
AV SELECTION : DYNAMIC
SEL. ADJ. EXIT RETURN
Information
Types of AV SELECTION
MOVIE1, 2: Set this mode when watching video in a dark
room.
This mode provides darker, finer pictures, like the screen
in movie theaters.
For a darker image, select MOVIE2.
STANDARD: Set this mode when watching video in a
bright room.
This mode provides pictures with distinct differences
between light and dark sections.
DYNAMIC: This mode provides brighter pictures than
STANDARD.
DEFAULT: Use this to reset the picture to the factory
default settings.
: OFF
R G
: LOW
: MIDDLE
: 2.1
: AUTO
: 0
: OFF
: DYNAMIC
EXIT RETURN
AV SELECTION : MOVIE1
17
En