Setting The Screen Size For S1/S2 Video Input; Setting The Signal And Black Level For Dvi Signal; Option3 Settings Menu; Using The Timer - Pioneer PDP-42MVE1 Manual De Instrucciones

Setting the screen size for S1/S2 video input

If the S-video signal contains screen size information, the
image will be automatically adjusted to fit the screen when
this S1/S2 is set to AUTO.
This feature is available only when an S-video signal is
input via the VIDEO3 terminal.
Example: Setting "S1/S2" to "AUTO"
Set "ADVANCED OSD" to "ON" in the main menu (1/
2), then perform the following operations.
On "S1/S2" of "OPTION2" menu, select "AUTO".
PREVIOUS PAGE
PWR. MGT.
PURECINEMA
LONG LIFE
SIDE MASK
S1/S2
DVI SET-UP
NEXT PAGE
SEL.
Information
S1/S2 settings
AUTO: Adjusts the screen size automatically according
to the S1/S2 video signal.
OFF: Turns the S1/S2 function off.
Setting the signal and black level for DVI
signal
Choose the signal for the DVI connector (PC or STB/DVD)
and set the black level.
Example: Setting the "PLUG/PLAY" mode to "STB/
DVD"
Set "ADVANCED OSD" to "ON" in the main menu (1/
2), then perform the following operations.
On "OPTION2" menu, select "DVI SET-UP", then press the
MENU/SET button.
The "DVI SET-UP" screen appears.
On "PLUG/PLAY" of "DVI SET-UP" menu, select "STB/
DVD".
PLUG/PLAY
BLACK LEVEL
SEL.
Information
PLUG/PLAY settings
PC: When connected to the PC signal.
BLACK LEVEL is set to "LOW" automatically.
STB/DVD: When connected to the SET TOP BOX, DVD etc.
BLACK LEVEL is set to "HIGH" automatically.
BLACK LEVEL settings
LOW: When connected to the PC signal.
HIGH: When connected to the SET TOP BOX, DVD etc.
Change "HIGH" into "LOW" if the black level appears gray.
22
En
OPTION2 2 / 3
: OFF
: ON
: 3
: AUTO
EXIT RETURN
ADJ.
DVI SET-UP
: STB/DVD
: HIGH
ADJ. EXIT RETURN

Option3 Settings Menu

Using the timer

This function sets the monitor to turn ON/OFF
automatically at a set time.
Set "ADVANCED OSD" to "ON" in the main menu (1/
2), then perform the following operations.
On "OPTION3" menu, select "TIMER", then press the
MENU/SET button.
The "TIMER" screen appears.
TIMER
PRESENT TIME
PROGRAM
SEL. MENU OK
PRESENT TIME
This sets the day of the week and present time.
Example: Setting "WEDNESDAY", "22:05"
On "TIMER" menu, select "PRESENT TIME", then press
the MENU/SET button.
The "PRESENT TIME" screen appears.
Adjust the items.
PRESENT TIME
RETURN
DAYLIGHT
SAVING TIME
WEDNESDAY
22 : 05 : 00
SET
SEL. ADJ.
Select "SET", then press the MENU/SET button.
The adjustments are stored and return to the TIMER menu.
* If you press the EXIT button instead of the MENU/SET
button, the settings can not be made.
PRESENT TIME
RETURN
DAYLIGHT
SAVING TIME
WEDNESDAY
22 : 05 : 00
SET
SEL. MENU OK
Information
PRESENT TIME settings
DAYLIGHT SAVING TIME: Use to set DAYLIGHT
SAVING TIME.
ON: The present time + 1 hour.
OFF: Cancelled
Day: Set the day of the week (e.g. Sunday).
Hour: Set the hour in the 24-hour format (range 00 to
23).
Minutes: Set the minutes (range 00 to 59).
: OFF
EXIT RETURN
: OFF
EXIT RETURN
: OFF
EXIT RETURN