Hardware Contents; Preparation - Harbor Breeze E-ER56ORB3LKLR Manual Del Usuario

HARDWARE CONTENTS (shown actual size)
AA BB
Lock
Washer
Blade
Qty. 9
Screw
Qty. 9

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents above. If any part is missing or damaged, do not attempt to
assemble the product. Contact customer service for replacement parts.
Estimated Assembly Time: 120 minutes
Tools Required for Assembly (not included): Electrical Tape, Phillips Screwdriver, Pliers, Safety
Glasses, Stepladder and Wire Strippers
Helpful Tools (not included):
(available at Lowe's) and Wire Cutters
Bulb Required (included): One 75-watt max. halogen bulb, size JD E11
DANGER: When using an existing outlet box, make sure the outlet box is securely attached to
the building structure and can support the full weight of the fan. Failure to do this can result in serious
injury or death. The stability of the outlet box is essential in minimizing wobble and noise in the fan
after installation is complete.
CAUTION: Be sure outlet box is properly grounded and that a ground wire (green or bare) is
present.
After opening top of carton, remove mounting hardware package from foam inserts. Remove motor
from packing and place on carpet or on foam to avoid damage to finish.
CAUTION: Carefully check all screws, bolts and nuts on fan motor assembly to ensure that they
are secured.
CC DD
E3 Wire
Connector
Stop
Qty. 10
Pin
Qty. 1
AC Tester Light, Tape Measure, Do-It-Yourself-Wiring Handbook
6