AERMEC VMF-RCC Manual Del Usuario página 64

Document E5 panel technical specifications
Edition 1 Date
MODE: the functioning mode is shown while the fan coil is running. The selector switch
icon can be replaced with
The presence of the
panel E5.
NAME: string associated to the fan coil (zone) to simplify identification
SET BLOCK: the presence of the
has forced the same characterisation to all fan coils (Set, scenario). When this
functionality is active, the
The increase and decrease keys are used to scroll all of the list of fan coils installed in the
system.
By pressing the SET key, access the pages regarding the fan coil parameters.
The icon indicates that the fan coil is momentarily enabled. Pressing the button disables the
functioning of the same and the changing of the image into
The icon indicates that the fan coil is momentarily disabled. Pressing the button enables the
functioning of the same and the changing of the image into
Press the ESC key for the system to display the menu page.
Pressing the key changes the zone heating mode:
V → heating of the fan coil unit only
R → radiant floor heating
V+R → fan coil + radiant floor heating
64 2104_2696105_00
09/08/2017 Author
to indicate that the fan coil is disabled from time period.
icon, indicates that the fan coil does not communicate with
key is not active.
if T < T - 2°C → FAN COILS+RADIANT (BOOST)
ROOM SET
if T > T - 2°C < T
ROOM SET
F. Carpanese
icon indicates that the "Global fan coil set" menu
.
.
→ RADIANT ONLY
SET
Code
Type indoor