AERMEC VMF-RCC Manual Del Usuario página 96

Subject Electronic adjustment
Document E5 panel technical specifications
Edition 1 Date
The chiller set can be compensated according to the external air temperature only if
the VMF algorithm is not enabled and no MultiControl is available.
To change the value of compensation curve points (Tae1, Tua1) and (Tae2, Tua2) select keys
increase ( ) and decrease (
press key enter (
disappearance of the denied display.
Points of the curve are correctly confirmed if Tae1 < Tae2, otherwise the phrase
Keys
operation season (summer or winter).
The icon /
of the chiller, according to the external air temperature.
Press the ESC key for the system to display the menu page.
Using the Page Up and Page Down keys, scroll the pages contained in the sub-menu
C
ONTROL TYPE PAGE
Use this page to select the type of control for the chiller/pdc (MODU_CONTROL, PICO2,
PICO5) in the system, or to disable it (NO CHILLER). Level: super_user.
96 2104_2696105_00
09/08/2017
). To confirm the value and pass to the subsequent datum
), while the effective memorisation in eeprom is highlighted by the
are used to change the display of the compensation curve inherent to the
indicates the enabling/disabling of the compensation of the water output set
Author F. Carpanese
will be temporarily displayed.
Group
Code
Type indoor