AERMEC VMF-RCC Manual Del Usuario página 80

Regulation and Control Service
Project VMF-RCC panel
Subject Electronic adjustment
E5 panel technical specifications
Document
Edition 1 Date
ON 2: switch-on time of the second time period
OFF 2: switch-off time of the second time period
TSET 2: room temperature set of the second time period
To enter the "program" modification mode, press the
denied display of the ON 1 time data. To change the value, simply act with the increase (
and decrease (
passes to the minutes of the ON 1 data.
The date change procedure takes place on confirmation of all data present on the page and the
disappearance of the cursor.
If just one time period is to be set during the day, just set ON 2 and OFF 2 equal to 00:00.
During programming of the time periods, pay attention to the introduction of data. In fact, it is
implied that OFF 1 > ON 1, ON 2 > OFF 1 and OFF 2 > OFF 1. If this condition is not respected
after the last time the
Use the Page Up and Page Down keys to scroll the time periods set on the different days of the
week.
Press the ESC key for the system to display the menu page.
80 2104_2696105_00
09/08/2017
) keys and to confirm simply press the enter key (
key is pressed, the
Economy mode
File SpecificheTecnicheVMF_RCC(Ed0)_EN.doc
Author F. Carpanese
Press key ECO/COM
Code
Group
Code
Type
key. This state is highlighted by the
). In this way the cursor
string is displayed.
Comfort mode
Press key ECO/COM
Page 28/61
indoor
)