AERMEC VMF-RCC Manual Del Usuario página 69

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Document
E5 panel technical specifications
Edition
1
Date
Press the ESC key for the system to display the menu page.
By pressing the SET key, access the pages regarding the DHW parameters.
The icon indicates that the DHW is enabled. Pressing the button disables the functioning of the
same and the changing of the image into
The icon indicates that the DHW is disabled. Pressing the button enables the functioning of the
same and the changing of the image into
The icon indicates that the integration resistance is not activated manually. Pressing the key
leads to enabling of the manual functioning of the RAS and image change into
again disables the manual function and takes the icon back to the initial state.
NOTE
The manual functioning of the RAS is not only linked to pressing the key seen previously, but is
also restricted by the following factors:
Presence of time periods for DHW
Temperature of the water present in the storage tank
External enabling for the use of the RAS
System on/off
09/08/2017
Author
The VMF-DHWxxx accessory may not be managed if multiple chiller/heat
pump units are controlled by the Multicontrol system.
Under these conditions, DHW is managed by the Multicontrol system
through the VMF-CRP1/VMF-CRP2 expansion (see fig. 2)
F. Carpanese
.
.
Code
Type
indoor
. Pressing
2104_2696105_00
69

Publicidad

Tabla de contenido
loading

Tabla de contenido