AERMEC VMF-RCC Manual Del Usuario página 93

Regulation and Control Service
VMF-RCC panel
Electronic adjustment
E5 panel technical specifications
1 Date
G
ENERATOR COLD SET PAGE
Use this page to:
 edit the chiller water output set during winter functioning. The acceptable values range
from 0.0 to 20.0 [°C]. Level: user.
 edit the parameter that identifies the band of values in which the chiller water output set
can vary during summer functioning if the Economy environment control has been
enabled. The acceptable values range from 3.0 to 20.0 [°C]. Level: user.
To enter the language editing mode, press the
is displayed. To edit the value, use the increase (
confirmed by pressing the enter (
the denied display disappears.
Press the ESC key for the system to display the menu page.
Using the Page Up and Page Down keys, scroll the pages contained in the sub-menu.
S
ET CHANGE PARAMETERS PAGE
Use this page to change the frequency and the increase/decrease in the correction of the
generator water output set when the "ECONOMY" control is enabled: the system will check the
actual load required by the fans coils at Δt intervals and change the machine set through the
VMF algorithm to minimize the system's power consumption.
File
09/08/2017 Author
) key and it is actually stored in the eeprom module when
SpecificheTecnicheVMF_RCC(Ed0)_EN.doc
F. Carpanese
key. This status is highlighted when no string
) and decrease (
Page 41/61
Code
Group
Code
Type indoor
) keys. The data is
2104_2696105_00
93