AERMEC VMF-RCC Manual Del Usuario página 97

E5 panel technical specifications
1 Date
To enter the control type modification mode, press the
denied display of the string. To change the value, act on the increase (
keys. The data is confirmed by pressing the enter (
eeprom is highlighted by the disappearance of the denied display.
Press the ESC key for the system to display the menu page.
Using the Page Up and Page Down keys, scroll the pages contained in the sub-menu
G -
ENERATOR STAND BY DELAY FROM FAN COIL THERMOSTAT PAGE
Use this page to enable and/or disable the possibility of switching off the chiller after a pre-fixed
time if all fan coils have been switched off from the thermostat to reach the values set for the
single rooms. The acceptable values range from 0 to 120 min.Level: user.
HYSTERESIS
HYSTERESIS:
(delay = 0) indicates that the chiller block cannot be enabled
(delay > 0) indicates that the chiller block function is enabled
09/08/2017 Author F. Carpanese
key. This state is highlighted by the
) key, while the effective memorisation in
Code
Type indoor
) and decrease (
DELAY
2104_2696105_00
)
97