AERMEC VMF-RCC Manual Del Usuario página 65

E5 panel technical specifications
Document
Edition 1 Date
S
ET TEMPERATURE PAGE
From this page it is possible to read and/or modify the regulation set at which the fan coil
thermostat is forced to work. The range of acceptable values is 0 ÷ 33.0 [°C].
enable/disable the set
point forcing by the
If the SetPoint is:
• LOCKED = the setpoint cannot be edited from the terminal on the machine (VMF-E2 or E4);
• UNLOCKED = the setpoint can be edited from the terminal on the machine (VMF-E2 or E4);
If the Mode is:
• LOCAL = the functioning mode (AUTO, V1, V2, V3, AUX)can be edited from the terminal on
the machine (VMF-E2 or E4);
• AUTO = AUTO functioning mode will be set. This mode cannot be edited from the terminal on
the machine (VMF-E2 or E4);
• V1 = V1 functioning mode will be set. This mode cannot be edited from the terminal on the
machine (VMF-E2 or E4);
• V2 = V2 functioning mode will be set. This mode cannot be edited from the terminal on the
machine (VMF-E2 or E4);
• V3 = V3 functioning mode will be set. This mode cannot be edited from the terminal on the
machine (VMF-E2 or E4);
• AUX = AUX functioning mode will be set. This mode cannot be edited from the terminal on the
machine (VMF-E2 or E4);
09/08/2017 Author
Key to
supervisor
F. Carpanese
Code
Type indoor
Keys to select the forced
functioning mode of the
zone.
2104_2696105_00
65