Battery Charging - Blatchford ElaniC Serie Guia Del Usuario

5 Battery Charging

Please familiarize yourself with the charging information in this section.
The batteries are not field replaceable and will be replaced as necessary when serviced.
Read the user instructions supplied with the charger before using for the first time.
We recommend the device is charged daily; it should take 5.5 hours to charge fully, depending
on residual charge. An exhausted or flat battery may take longer.
Setting Up
Lay the limb on a flat surface and connect the inductive charger pod to the charging surface on
the back of the device.
Use the Charging Indicator LED on the right hand side of the device to confirm that charging has
initiated correctly:
Do not allow anything (e.g. stocking, clothing) to intrude in between the charging
surface and the charger pod while charging is in progress. This will result in decreased
charging performance and buildup of heat.
Charger
Pod
Charging
Single Flash Repeated
Double Flash Repeated
Triple Flash Repeated
Steady ON/Steady OFF
Rapid Flashing
*Charging continues when normal charging temperature is reached. (See Section 4.)
Reset
The device will take several seconds to reset when the charger is disconnected and a single
blue flash from the Status Indicator LED on the left hand side of the device will confirm a correct
startup.
Charging
Indicator
LED
One initial flash
LED
x1 — Connection Established
Followed By
7
Charging state
Charging - Battery Empty
Charging - Charge Level Medium
Charging - Charge Level High
Charging Completed
High Temperature Shut Down
938439PK1/1-0321
*