Customer Service; Equipment Return; Ordering Information - Buffalo filter VisiClear Manual Del Operador

Customer Service

Section 4.0

4.1 Equipment Return

For the quickest response to your service needs, please follow these procedures:
Step 1: Write down model and the serial number of the VisiClear™ Surgical Smoke Plume
Evacuator.
Step 2: Call Customer Service at the toll free or local number listed and describe the problem.
Step 3: If the problem cannot be resolved over the phone and the equipment must be returned
for repair, you must obtain a "Return Material Authorization" (RMA) number from Customer
Service before returning the system.
Step 4: If you have the original packing for your VisiClear™ Surgical Smoke Plume Evacuator,
use it to properly return your unit. If you do not have the original packing material, ask
Customer Service for advice on how to pack the unit for return shipment.
Step 5: Freight for all returned goods should be prepaid by the shipper. Address will be supplied
by Customer Service.

4.2 Ordering Information

To reorder, obtain replacement parts or to return a unit for service, call Customer Service at:
800-343-2324
OR
1 (716) 835-7000
or contact your authorized BUFFALO FILTER® Distributor/Representative.
BUFFALO FILTER® VisiClear™ Surgical Smoke Plume Evacuator versions available:
• 100/120 VAC 50/60 Hz
• 220/240 VAC 50/60 Hz
Available accessories:
• VisiClear™ Filters
• Suction Canister
• EZLink Automatic Activation Device
• Hoses & Tubing
• Reducer Fittings
• Electrosurgical Pencil Adapters
• Electrosurgical Smoke Pencil
Buffalo Filter® VisiClear™ Operator's Manual 28