Serpento FORZA 150 Manual De Usuario página 107

Warning:
Do not drive immediately after replacing a new wheel disk brake lining. Press the braking grip for several times to allow the brake lining fully
extended, the grip spring force restored, and the brake fluid is circulated smoothly.
Front brake light switch
The switch of front brake light is located below the brake grip. Loosen the screw and move the switch position back and forth to find a proper
point so that the lamp is lit immediately when pressure is applied but before the grip is fully pressed.
Rear brake
Adjustment of rear-wheel brake
If the rear brake is drum brake, to adjust the rear-wheel brake pedal, set the pedal to the most comfortable position for driving by rotating the
pedal adjustment nut. Then, rotate the free play adjusting nut (2) to keep the free play (1) between 20-30mm.
44