(Parking) Position (FIG1): To park the motorcycle, turn the key to
. position. In this position, the key can be removed and the tail lamps
(parking lamps) and front positioning lamps keep ON for parking on roadside at night.
WARNING: Before turn the key to
, position, park the vehicle with its side stand or central stand in a firm way.
Position (FIG2): In order to lock the handlebar, turn the bar to the left, then insert the key. Rotate it clockwise to full stop for locking the
handlebar.
WARNING: If the handlebar is locked, the motorcycle is never pushed any longer; otherwise you will lose balance.
Steering lock
If ignition switch is FIG1 type, the position of steering lock is shown as follows.
To lock the steering handlebar, turn the handlebar to left, insert the key and turn it clockwise.
Warning: When the steering handlebar is locked, never move the motorcycle or you may lose balance.
12