Preparation Before Operation; Introduction Of Operation Function - Gree YAP1F Manual Del Usuario

8
9 X-FAN
10 TIMER ON
11 TIMER OFF
12 SAVE
13 SLEEP
14 LIGHT
15 CLOCK
16 I FEEL
17 TEMP

2.1 Preparation before operation

When using the remote controller for the first time or after replacing the batteries,
please set the time of the system according to current time in the following steps:
Pressing CLOCK button,
(1).
Pressing ▲ or ▼ button, the clock time will increase or decrease rapidly.
(2).
Press CLOCK button again to confirm the time and return to display current
(3).
time.

2.2 Introduction of operation function

Selecting operation mode
(1).
In unit on status, press MODE button to select operation mode in following
sequence:
 Floor heating, quick heating and heat supply modes are valid only with
specialized remote controller.
 If change to specialized remote controller, press MODE button and TEMP
button simultaneously, and then
 If change to normal remote controller, press MODE button and TEMP button
Copyright 2018. This translation is property of GREE PRODUCTS SL. All rights reserved. Total or partial reproduction without its express authorization is prohibited.
User's Manual of Remote Controller
Set up&down swing status
Set X-FAN function
Set timer on function
Set timer off function
Set energy-saving function
Set sleep function
Set light function
Set clock of the system
Set I FEEL function
Switch temperature displaying type on the unit's display
is blinking.
will blink for three times.
9