The remote controller should be placed 1m away from the TV set or stereo
① .
sound sets.
The operation of remote controller should be performed within its receiving
② .
range.
If you need to control the main unit, please point the remote controller at the
③ .
signal receiving window of the main unit to improve the receiving sensibility of
main unit.
When the remote controller is sending signal, "
④ .
second. When the main unit receives valid remote control signal, it will give
out a sound.
If the remote controller does not operate normally, please take the batteries
⑤ .
out and reinsert them after 30 seconds. If it still can't operate properly, replace
the batteries.
When replacing the batteries, do not use old or different types of batteries,
⑥ .
otherwise, it may cause malfunction.
When you won't use the remote controller for a long time, please take out the
⑦ .
batteries.
Copyright 2018. This translation is property of GREE PRODUCTS SL. All rights reserved. Total or partial reproduction without its express authorization is prohibited.