Gree YAP1F Manual Del Usuario página 8

killing the bacteria in the room.
Setting air function
(10).
Press
Press
When the indoor unit is connected with fresh air valve, air function setting can
control the connection of fresh air valve, which can control the fresh air volume and
improve the air quality inside the room.
Setting sleep function
(11).
In unit on status, press SLEEP button to turn on or turn off sleep function.
 When
 When
Notes:
Sleep function can not be set in auto and fan mode;
① .
When turning off the unit or switching mode, sleep function is cancelled;
② .
Setting I FEEL function
(12).
In unit on status, press I FEEL button to turn on or turn off I FEEL function.
When is displayed, I FEEL function is on.
When is not displayed, I FEEL function is off.
When I FEEL function is turned on, the unit will adjust temperature according to the
temperature detected by the remote controller to achieve the best air-conditioning
effect. In this case, you should place the remote controller within the valid receiving
range.
Setting timer
(13).
You can set the operation time of unit as you need. You can also set timer on and
timer off in combination.
Before setting, check if the time of the system is the same as the current time. If not,
please set the time according to current time.
Setting timer off
1).
Pressing TOFF button, "OFF" is blinking and time displaying zone displays the
① .
timer time of last setting.
Press
② .
Press TOFF button again to confirm setting. OFF is displayed and time
③ .
displaying zone resumes to display current time.
Copyright 2018. This translation is property of GREE PRODUCTS SL. All rights reserved. Total or partial reproduction without its express authorization is prohibited.
button until is displayed, then air function is turned on.
button until is disappeared, then air function is turned off.
is displayed, sleep function is on.
is not displayed, sleep function is off.
or button to adjust the timer time.
User's Manual of Remote Controller
5