Gree YAP1F Manual Del Usuario página 6

Setting temperature
(2).
In unit on status, press
button to decrease setting temperature. The range of temperature is from 16℃ to 30℃.
Note: Under auto mode, manual adjustment of temperature is not needed.
Adjusting fan speed
(3).
In unit on status, press FAN button to adjust fan speed in following sequence:
Notes:
When operation mode changes, fan speed is memoried;
① .
Under dry mode, fan speed is low and can not be adjusted.
② .
Setting swing function
(4).
 Setting left&right swing
Under simple swing status, press
1).
status;
Under fixed-angle swing status, press
2).
angle circularly as below:
operate continuously
Note:
according to above-mentioned
 Setting up&down swing
Under simple swing status, press
1).
status;
Under fixed-angle swing status, press
2).
angle circularly as below:
operate continuously
Note:
according to above-mentioned
Copyright 2018. This translation is property of GREE PRODUCTS SL. All rights reserved. Total or partial reproduction without its express authorization is prohibited.
User's Manual of Remote Controller
button to increase setting temperature and press
left&right swing in 2 seconds, swing states will change
order, or switch closed state and
left&right swing in 2 seconds, swing states will change
order, or switch closed state and
3
button to adjust left&right swing
button to adjust left&right swing
state.
button to adjust up&down swing
button to adjust up&down swing
state;