Gree YAP1F Manual Del Usuario página 14

In unit off status, press ▲ button and
swing mode and fixed-angle swing mode.
for 2 seconds during switching.
Setting quiet function
(5).
In unit on status, press
: auto quiet function is on;
When quiet function is set, fan speed of indoor unit will be decreased to the lowest
speed in order to reduce the noise of indoor unit.
Notes:
Quiet function is not available in dry, fan and floor heating modes;
① .
Quiet mode will be exited automatically when changing fan speed;
② .
When turbo function is set, setting auto quiet function will cancel turbo
③ .
function.
Setting health function
(6).
In unit on status, press
When
1).
When
2).
Health function is available when the unit is equipped with anion generator. When
health function is on, the anion generator will start operation, adsorbing the dusts and
killing the bacteria in the room.
Setting air function
(7).
 Turning on air function:
Press
1).
displays the last air function level.
Press ▲/▼ button to adjust air function level. If there is no operation within 5
2).
seconds, the setting will be exited automatically.
Pressing
3).
Press
Copyright 2018. This translation is property of GREE PRODUCTS SL. All rights reserved. Total or partial reproduction without its express authorization is prohibited.
button to adjust quiet status in following sequence:
: quiet function is on.
button to turn on or turn off health function.
is displayed, health function is on.
is not displayed, health function is off.
button until
button, is displayed and air function is turned on.
button until is disappeared, then air function is turned off.
User's Manual of Remote Controller
button to switch between simple
on the remote controller will be blinking
is blinking. Set temperature displaying zone
11