Gree YAP1F Manual Del Usuario página 13

User's Manual of Remote Controller
simultaneously, and then
Setting temperature
(2).
In unit on status, press ▲ button to increase set temperature and press ▼ button
to decrease setting
Note: Under auto mode and when absence function is on, temperature adjustment
is invalid.
Adjusting fan speed
(3).
In unit on status, press FAN button to adjust fan speed in following sequence:
When is set, the whole unit operates in super high speed to achieve quick
cooling or heating.
Notes:
① Under auto, dry and fan modes or when quiet function is on, turbo function is
invalid;
② Under dry mode, fan speed is low and can not be adjusted.
Setting swing function
(4).
 Setting left&right swing
Under simple swing status, press
1).
status;
Under fixed-angle swing status, press
2).
angle circularly as below:
In unit off status, press ▲ button and
swing mode and fixed-angle swing mode.
for 2 seconds during switching.
 Setting up&down swing
Under simple swing status, press
1).
status;
Under fixed-angle swing status, press
2).
angle circularly as below:
Copyright 2018. This translation is property of GREE PRODUCTS SL. All rights reserved. Total or partial reproduction without its express authorization is prohibited.
will blink for three times.
temperature.
button to adjust left&right swing
button to adjust left&right swing
button to switch between simple
on the remote controller will be blinking
button to adjust up&down swing
button to adjust up&down swing
10