Introduction Of Special Functions - Gree YAP1F Manual Del Usuario

User's Manual of Remote Controller
Press TOFF button again to cancel timer and OFF is not displayed.
④ .
Setting timer on
2).
Pressing TON button, "ON" is blinking and time displaying zone displays the
① .
timer time of last setting.
Press
② .
Press TON button again to confirm setting. ON is displayed and time
③ .
displaying zone resumes to display current time.
Press TON button again to cancel timer and ON is not displayed.
④ .

1.4 Introduction of special functions

Setting child lock
(1).
Press and
and is displayed.
Press and
controller and is not displayed.
If the buttons are locked,
operation on the button is invalid.
Switching temperature scale
(2).
In unit off status, press MODE button and
temperature scale between ℃ and ℉ .
Setting energy-saving function
(3).
In unit on status and
simultaneously to enter energy-saving mode.
 When
 When
If you want to turn off the energy-saving function, press CLOCK and TEMP button
and is not displayed.
Note: energy-saving function is only available in
when switching mode or setting sleep function.
Absence function
(4).
In unit on status and under heat mode,
simultaneously to enter absence function. Temperature displaying zone displays 8 and
is displayed.
Press CLOCK and TEMP button simultaneously again to exit absence function.
Temperature displaying zone resumes previous display and is not displayed.
Copyright 2018. This translation is property of GREE PRODUCTS SL. All rights reserved. Total or partial reproduction without its express authorization is prohibited.
or button to adjust the timer time.
button simultaneously to lock the buttons on remote controller
button simultaneously again to unlock the buttons on remote
blinks 3 times when pressing the button and any
under cool mode,
is displayed, energy-saving function is on.
is not displayed, energy-saving function is off.
button simultaneously to switch
press CLOCK and TEMP button
cooling mode and it will be exited
press CLOCK and TEMP button
6