Technical Service; Accessories/Spare Parts; Technical Data; Classification Acc. To Directive 93/42/Eec - Aesculap Acculan 4 GA344 Instrucciones De Manejo

Aesculap
Small drill GA344

10. Technical Service

Danger to life of patients and users if the product
malfunctions and/or protective measures fail or are
not used!
WARNING
►
Do not perform any servicing or maintenance
work under any circumstances while the product
is being used on a patient.
►
Do not modify the product.
Modifications carried out on medical technical equipment may result in
loss of guarantee/warranty rights and forfeiture of applicable licenses.
►
For service and repairs, please contact your national B. Braun/Aesculap
agency.
Service addresses
Aesculap Technischer Service
Am Aesculap-Platz
78532 Tuttlingen / Germany
Phone: +49 (7461) 95 -1601
Fax: +49 (7461) 14 -939
E-Mail: ats@aesculap.de
Or in the US:
Aesculap Inc.
Attn. Aesculap Technical Services
615 Lambert Pointe Drive
Hazelwood
MO, 63042 USA
Aesculap Repair Hotline
Phone: +1 (800) 214 -3392
Fax: +1 (314) 895 -4420
Other service addresses can be obtained from the address indicated above.

11. Accessories/Spare parts

Art. no. Designation
GA344244 Kirschner wire protection sleeve
GA344211 Rinsing adapter
GA675 Cover
GA346 Li-Ion battery short
GA678 Sterile funnel
GA679 Battery removal device
GB257R ECCOS sieve basket with fixation
GB600 STERILIT Power Systems oil spray
16
Acculan 4
®
Art. no. Designation
GB600880 Oil spray adapter for GA344/GA844
TA011944 Cleaning brush
GB482R ECCOS fixation for GA344
GB487R ECCOS fixation lid
GB488R ECCOS fixation sterile funnel
GB489R ECCOS fixation battery removal aid
TA014550 Instructions for use of small drill GA344 (for ring
binder)
TA014551 Instructions for use of small drill GA344 (flyer)

12. Technical data

12.1 Classification acc. to Directive 93/42/EEC

Art. no. Designation
GA344 Small drill

12.2 Performance data, information about standards

Max. power
Max. motor speed
Rotational direction
Cannulation
Weight (operational)
Dimensions (L x W x H, ready for
operation)
Applied part
EMC
Conforming to standard
The product was subject to 500 preparation cycles as a test by the manu-
facturer and has passed.
Class
IIa
approx. 85 W
-1
1 250 min
Right and left rotation, oscillation
3.3 mm
0.84 kg ± 10 %
177 mm x 124 mm x 55 mm ±5 %
Type BF
IEC/DIN EN 60601-1-2
IEC/DIN EN 60601-1