GESTRA RK Serie Instrucciones De Modificación página 14

Fitting the RK stroke limiter
To remove the spring cap of devices with DN 40
to DN 100, proceed as follows:
 Using snap ring pliers, squeeze the spring cap
(5) together (1.).
 Rotate the spring cap so that it is no longer held
by the grooves (4) (2.).
 Lift the spring cap upwards and out of the
device.
The spring cap cannot be reused. Therefore,
use the supplied new spring cap for retrofitting.
 Dispose of the old, removed spring cap in
accordance with local regulations.
Continued
5
EN
1.
2.
4