Wire Cutting Device Dav En - Abicor Binzel BRS-CCi Instructivo De Servicio

6 Putting into operation
6.7 Wire cutting device DAV
1
Fig. 9
1 Move the torch with the free wire end to the cutting area of the wire cutter (1) (P3).
The wire must lie against the fixed jaw and the gas nozzle (2) must be directly above the cutter.
Program the way points and commands as described in the flow chart.
 Fig. 11 Flow chart on page EN-14
EN - 12
1
Wire cutter
Wire cutting device DAV
2
P3
Gas nozzle
2
BRS-CCi