Cleaning Of Machine Oil Tank; Check-Up Of Spark Plug - Serpento COYOTE 250 Manual De Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

18

Cleaning of Machine Oil Tank

Drain off all the run-in machine oil from the oil tank.
Dismount the related parts.
Wash clean all the related parts.
Fill in the required oil.
*This job should not be done by any untrained persons but shall be done at an authorized service center.
Screw plug for oil draining

Check-up of Spark Plug

Remove the cap of spark plug and screw off the spark by the plug wrench.
Clean the spark plug all around or replace it if it is corroded or there is too much deposit on it.
Regulate the gap of the spark plug to 0.65-0.75mm.
The spark plug of the designated type should be used. D8REA
 
0. 65-0. 75

Hide quick links:

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido