Adjustment Of Clutch; Brake Checking - Serpento COYOTE 250 Manual De Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

22

Adjustment of Clutch

The clutch should be adjusted with the engine in stopped state .
There should be a free operating movement of 10-20 mm at the end of the clutch lever as shown in the figure on the right side .
When adjustment is needed ,loosen the set the clutch lever to the required range of free operating movement .In case of adjustment to be made
to a great extend ,turn the clutch adjusting screw studon the right crankcase .
Is tart she engine to ascertain whether the adjusted clutch works normally .
Readjustment has to be made if there is slipping of clutch or difficulty in the engaement of gears .

Brake Checking

1)Pull up the front and rear brakes respectively and check for wear of the brake shoes .If the mark " " on the brake drum cover aligns with that
" " on the brake cam, it means that the brake shoes are already worn to the limit and have to be .
2)Replacement should becarried out at a desinated service center and it is recommended that the parts made by our company are there in
 
10-20 mm.

Hide quick links:

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido