Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Section
Audio Adjustments
09
Setting the sound focus equal-
izer
Clarifying the sound image of vocals and instru-
ments allows the simple staging of a natural,
pleasant sound environment.
Even greater listening enjoyment will be
obtained if seating positions are chosen care-
fully.
•
boosts the treble on the front output and
FRT1
the bass on the rear output.
boosts the treble and the bass on the front
FRT2
output and the bass on the rear output. (The
bass boost is the same for both front and rear.)
For both
and
FRT1
more pronounced effect than the
1 Press
/
SFEQ
SFC
the
mode.
SFEQ
2 Press
/
SFEQ
SFC
the desired
SFEQ
(front1-high) —
FRT1-H
(front2-high) —
FRT2-H
(custom) —
CUSTOM
3 Press 1 or ¡ to select the desired
position.
Press 1 or ¡ until the desired position
appears in the display.
(left) —
LEFT
CENTER
• Pressing 2 or 3 on the head unit also per-
forms the same operation.
Notes
• If you adjust the bass or treble,
memorizes an
and treble are adjusted for personal prefer-
ence.
• If you switch the
tion is automatically switched off. By switch-
ing the
function on after selecting the
H.P.F.
mode, you can combine
SFEQ
with
function.
SFEQ
62
En
the
setting provides a
FRT2
H
setting.
L
on the head unit to display
on the head unit to select
mode.
(front1-low) —
FRT1-L
(front2-low) —
FRT2-L
(off)
SFEQ OFF
(center) —
RIGHT
CUSTOM
mode in which the bass
SFEQ
mode, the
SFEQ
H.P.F.
function
H.P.F.
Using balance adjustment
You can select a fader/balance setting that pro-
vides an ideal listening environment in all occu-
pied seats.
1 Press
Press
until
A
• If the balance setting has been previously
adjusted,
• Pressing
forms the same operation.
2 Press E or e to adjust front/rear
speaker balance.
Each press of E or e moves the front/rear
speaker balance towards the front or the rear.
•
Fad F15
speaker balance moves from front to rear.
•
Fad F/R 0
speakers are used.
• When the rear output setting is
you cannot adjust front/rear speaker balance.
Refer to Setting the rear output and subwoofer
controller on page 82.
• Pressing 5 or ∞ on the head unit also per-
forms the same operation.
3 Press 1 or ¡ to adjust left/right
speaker balance.
When you press 1 or ¡,
(right)
played. Each press of 1 or ¡ moves the
left/right speaker balance towards the left or the
right.
•
–
Bal L9
speaker balance moves from left to right.
• Pressing 2 or 3 on the head unit also per-
forms the same operation.
func-
to select
.
A
Fad
appears in the display.
Fad
will be displayed.
Bal
on the head unit also per-
AUDIO
–
is displayed as the front/rear
Fad R15
is the proper setting when only two
Bal L/R 0
is displayed as the left/right
Bal R9
,
Rear SP:S.W
is dis-
Publicidad
Capítulos
Tabla de contenido
