Transport; Storage; Care And Service; Safety Inspection/Maintenance Contract - Kärcher HD 2.3/15 M Cage Ed Manual Del Usario

3. Allow the device for run for a maxi-
mum of 1 minute until the pump and
lines are empty.
Note
Use commonly available, Glycol-
based vehicle anti-freeze. Observe the
handling instructions of the anti-freeze
manufacturer.

Transport

CAUTION
Risk of injury, risk of damage
Be aware of the weight of the device
during transportation.
ATTENTION
Risk of damage
Protect the trigger of the high-pressure
gun from damage.
1. For transport over longer distances,
pull the device on the push handle
behind it.
2. To climb stairs, pull the device up
step by step.
3. Secure the device in accordance
with the respectively applicable
guidelines to prevent it from slipping
or overturning when in transport.
Transport holder for surface
cleaner or rotary nozzle
1. Fit the connection nozzle of the sur-
face cleaner or the rotary nozzle on-
to the transport holder on the tubular
frame.
2. Screw on the union nut by approxi-
mately 1 turn.

Storage

CAUTION
Risk of injury, risk of damage.
Be aware of the weight of the device
during storage.
1. Store the device indoors only.
12

Care and service

DANGER
Risk of injury due to inadvertent de-
vice start-up and electric shock.
Switch off the device immediately and
unplug the mains plug before perform-
ing work.
Safety inspection/maintenance
You can agree on regular safety in-
spections or close a maintenance con-
tract with your dealer. Please seek
advice on this.
Each time before use
1. Check the connection cable for
damage, have a damaged cable re-
placed immediately by the autho-
rized Customer Service or a
qualified electrician.
2. Check high-pressure hose for dam-
age, replace damaged high-pres-
sure hose immediately.
3. Check the device for leaks. 3 drops
of water per minute are permissible.
Contact Customer Service in case of
more serious leaks.
1. Clean the sieve in the water connec-
tion.
Clean the sieve in the water
1. Unscrew the union nut.
2. Pull out the hose nozzle with sieve.
3. Clean the exterior of the sieve and
rinse it.
Note: Align the hex-head of the
hose union to the connection on the
device.
4. Insert hose nozzle with the sieve.
5. Tighten the union nut.
English
contract
Weekly
connection