Alarm Letter Codes And Descriptions - Siemens SITRANS F Serie Guia De Inicio Rapido

4.1

Alarm Letter Codes and Descriptions

Letter Code Alarm
S
0
E
R
F
A
M
K
I
P
The display shown below indicates where the Alarm Codes appear on the LCD display screen.
①
FUS1010 IP65 NEMA 4X Quick Start
Operating Instructions, 12/2008, CQO:QSG002 Revision B
Description
Spacing Transducer spacing may need readjustment.
ZeroMatic ZeroMatic signal fault.
Empty Pipe is empty.
Rate Flow above High setting or below Low setting.
Fault Three continuous seconds without new data update.
Aeration Current aeration percentage exceeds the alarm set point.
Memory Last valid reading for a selected interval during Fault condition.
Makeup In-Process Makeup occurred.
Interface Liquid Vs exceeds interface alarm set point.
Pig Pig passage detected (optional).
Alarm Codes
Troubleshooting/FAQs
4.1 Alarm Letter Codes and Descriptions
37