Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
4.7 - Hydraulic outlet chute
If the Harvester is equipped with a hydraulic
chute, the deflector control and the chute
turning are performed by hydraulic cylinders.
How to regulate the deflector:
The deflector function is to direct the jet
of chopped crop in order to facilitate the
distribution of the forage inside the cart.
Connect the two hydraulic cylinder hoses
from the deflector onto the valves from the
tractor's remote control.
Engage the hydraulic control lever located on
the tractor to activate the hydraulic cylinder
and move the deflector.
How to turning the outlet chute:
The rotating movement of the outlet chute
is performed by a double acting hydraulic
cylinder. Connect the two hydraulic cylinder
hoses from the chute onto the valves from
the tractor's remote control.
Engage the hydraulic control lever located on
the tractor to activate the hydraulic cylinder
and turn the outlet chute.
NOTE!
The hydraulic flow valve (F) controls
the flow of the oil and, consequently,
the speed at which the chute rotates.
It is important to regulate the opening
of this valve in order to obtain a soft
movement of the cylinder, without
making the chute bounce during
turning.
The ideal setting depends on the flow
rate of the tractor's hydraulic system.
It is recommended to perform some
practical tests to find the best setting:
open the register a little, activate the
piston and observe the movement. If
necessary, repeat the procedure by
changing the opening of the register
(F).
ROTATION:
Hydraulic
Activation
Instructions Manual
4. Preparation
DEFLECTOR:
Hydraulic drive
F
41
Publicidad
Capítulos
Tabla de contenido
