Hydraulic Outlet Chute - Nogueira NEW PECUS Duo G2 Manual De Instrucciones

4. Preparation

4.7- Hydraulic outlet chute

The harvester leaves the factory equipped with
a hydraulically controlled outlet chute. The
direction of the deflector and the movements
to raise/lower the chute are performed by
hydraulic cylinders. The turning movement is
performed by a hydraulic motor.
NOTE!
Connect the hydraulic cylinder hose to
a valve on the tractor remote control.
The hose has a valve that allows to
control the oil flow and, consequently,
the speed that the outlet chute goes up
and down. It is important to adjust the
opening of the valve in order to obtain
a smooth movement of the cylinder,
without bumps in the chute. The
ideal setting depends on the hydraulic
system flow of the tractor used.
It is recommended some practical tests
to be performed, so that you can find
the best adjustment: open the valve
a bit, activate the cylinder and observe
the movement. If necessary, repeat
the procedure by changing the valve
opening.
60
Hydraulic Cylinder
moves the deflector.
Hydraulic Motor
turns the chute
Instructions Manual
Hydraulic Cylinder
raises and lowers the
chute
VALVE