2- Place The Outlet Chute In Transport Position - Nogueira FTN-1000 G3 Manua De Instrucciones

4. Preparation

4.8.2- Place the outlet chute in transport position

To facilitate transport, the outlet chute is
articulable. Lower it whenever you are
transporting the machine.
To place the chute in the transport position,
proceed as follows:
With maximum care, lift the lever (B) and
1.
slowly lower the chute.
Attach the chute to the transport position
2.
by securing the deflector (J) to the machine
arm with the bolt and wing nut (A).
The impacts on the chute during transport
may damage it if it is loose during transport.
Therefore, always secure the chute with the
bolt and wing nut (A) when transporting the
machine.
44
Outlet chute in transport
position
B
Instructions Manual
J
A