Fill The Fresh Water Tank / Recycling Water Tank; Working With Water Spray - Kärcher MC 250 Manual Del Usuario

1. The sound proofing of 99 dB (A) is achieved when the
engine speed is set to 1400 rpm.

2.4.4 Fill the fresh water tank / recycling water tank

Left side panel
1
Filler neck with cover
2
Fresh water tank cap
3
Manual suction hose flap/overflow protection
4
Note
The open flap of the manual suction hose provides over-
flow protection when filling
1. Swing the left side panel outwards.
2. Remove the cover from the filler neck and attach a suit-
able water supply hose.
3. Unscrew the fresh water tank cap.
4. -Open the manual suction hose flap
Filler neck with cover
1
Switchover valve position for filling the recycling water
2
tank
Switchover valve position for filling the fresh water tank
3
5. Select the position of the switchover valve accordingly.
Fill the fresh water tank or recycling water tank.
a Maximum fresh water tank filling quantity: 190 litres
b Maximum recycling water tank filling quantity: 445 li-
tres
6. Fit the cover again after filling.

2.4.5 Working with water spray

● Working with fresh water
The dosing buttons for the spray water are located next to
the steering wheel.
Fresh water pump switch
1
Left side brush spray water dosage knob
2
Right side brush spray water dosage knob
3
Suction mouth spray water dosage knob
4
(1)Switch on the fresh water pump at the switch on the arm
rest control panel.
(2)Turn the corresponding dosing buttons to adjust the wa-
ter quantity.
More water quantity: Turn anti-clockwise.
Less water quantity: Turn clockwise.
● Working with recycling water
Recycling water pump switch
1
Save button
2
Rotary knob
3
English 41